Shibuya Ultima CPX 3 Compound Sight
The All New Ultima 3 From Shibuya Is Now Available In Both Left And Right Handed, With A Selection Of 4 Different Colours.
This New Model Change Is Designed To Bring Over A Few Of The New Features From The PRO Sights, And Increase Part Compatibility Across The Line.
The CPX 3 Sights Feature The 4″ Elevation Bar From The CP PRO, And Are Compatible With The Laser-Engraved Metal Sight Scales.
In The RC 3 Sights, You Will Find The 5.2″ Elevation Bar, As Well As The Knurled Sight Pin Locking Knob From The RC PRO Sights.
Both Of These Sights Feature A New, Ambidextrous Mounting Block, Which Reduces The Amount Of Overhang From Certain Risers.
Related products
-
Beiter Compound Rest
Add to cartWhen you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
INCLUDED:- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
-
Shibuya Ultima RC 3 Recurve Sight
Add to cartThe All New Ultima 3 From Shibuya Is Now Available In Both Left And Right Handed, With A Selection Of 4 Different Colours.
This New Model Change Is Designed To Bring Over A Few Of The New Features From The PRO Sights, And Increase Part Compatibility Across The Line.
In The RC 3 Sights, You Will Find The 5.2″ Elevation Bar, As Well As The Knurled Sight Pin Locking Knob From The RC PRO Sights.
The CPX 3 Sights Feature The 4″ Elevation Bar From The CP PRO, And Are Compatible With The Laser-Engraved Metal Sight Scales.
Both Of These Sights Feature A New, Ambidextrous Mounting Block, Which Reduces The Amount Of Overhang From Certain Risers.
-
Avalon Tec X Compound Shorty Sight
Add to cartFeatures an all aluminium construction with a 6″ extension bar, packed full of features and accepts standard 10/32″ scope thread.
The shorty sight has the same lightweight build and features micro adjustments for both elevation and windage as the standard tec x, but with a shorter 6″ extension bar.
The sight comes with an offset block which sits between the sight arm and the sight rail, the offset block allows you to attach the rail either left or right of the arm for an extra level of adjustment.
The Avalon Tec X accepts all 10-32 threaded scopes and is produced in 7 anodised colour options.
- Full aluminium construction
- Lightweight
- Quick release fast vertical adjustment
- 6″ extension arm
- Windage and elevation adjustment
- Standard 10/32 scope thread
- Right and left-hand versions available
- Removable sight blockhead
- Offset block included
- Soft storage case and tools included
- 7 anodised colour options
-
Sanlida X10 Compound Sights
Add to cartThe X10 compound sight from Sanlida is available with either a 6in or 9in carbon extension. This model features the shorter 6 inch extension arm produced carbon fabrics giving accuracy and lightness. The main body is machined from 6061 grade aluminium. The Sanlida X10 Compound Sight features a precisely engineered shape and design for quick vertical and horizontal adjustments with clear scale indications for ease of use and reduces errors.
SPECIFICATIONS:
- Target sight for use with compound bows
- Accepts any 10-32 threaded scope
- Scope not included
- Materials: Carbon extension arm / 6061 aluminium body and components
- Extension length: 6 inches
- Weight: 226g
- RH model only
- Colour: Black
- Made in China
Reviews
There are no reviews yet.