Mathews TRX Compound Bow
₹145,000.00
Built off of the proven design of the longer TRX models, the 38 inch axle-to-axle TRX 38 fills the void perfectly for shooters looking for a shorter, lighter, more comfortable bow for their draw length.
Draw lengths range 23 inches to 30 inches and draw weight goes from 50 pounds up to 70 pounds on the new TRX 38. The new 70V percent mod gives shooters a deeper valley while the 80 and standard 70 percent mods remain an option. A true-centre nocking point ensures straight and level nock travel, further enhancing shot-to-shot consistency and a 7.5-inch brace height provides unmatched forgiveness.
FEATURES:
- Design based on successful TRX bows
- True-centre nocking point
- More comfortable draw at shorter draw lengths
SPECIFICATIONS:
- Axle-to-Axle: 38″
- Brace Height: 7.5″
- Bow Rating: 328 fps
- Draw Length: 23″ – 30″
- Draw Weight: 50 lb, 60 lb
- Mass Weight: 4.86 lb
- Hand: Right or Left Handed
- Colour: Black, Blue, Red, White, Yellow
Related products
-
CORE Zeal – 30-45 lbs – Compound Bow
Add to cartAn exciting bow for beginners! – The CORE Zeal compound bow.
CORE’s new compound bow Zeal is without a doubt an amazing entry-level bow. Of course, all shooters must decide for themselves which bow is perfect for them, but already at first glance, the Zeal really seems quite impressive. With a length of 38.75 inches (approx. 98cm) – measured from axle to axle – and a relatively large brace height of 7.75 inches, the bow can be drawn very comfortably and also forgives one or two mistakes in the shot process. Due to the relatively large distance between the cams, the angle on the drawn string is large enough to safely shoot the bow both with a mechanical release and with bare fingers as well.
With a weight of only 1700g and a let-off of 70%, the Zeal makes it quite easy for any beginner to hold the fully drawn bow and concentrate on the target.Even when it comes to the adjustment options, the bow makes it easy for the shooter. The draw weight can be adjusted between 30 and 45 lbs and the draw length between 23 and 30 inches without needing a bow press. The draw weight is adjusted via the limb screws, which can be loosened up to 7 full turns counterclockwise.
The bow is fitted with all mounting options for accessories, including D-Loop as well as Peep sight, and ready to make your entry into archery child´s play.
Available as a right-handed model only.
Specifications:
Draw weight: 30-45 lbs
Draw length: 23-30″
Brace height: 7.5″
Let-Off: 70%
Length (axle-to-axle): 38.75″ (approx. 98 cm)
Weight (without mounting parts): approx. 1.7 kgColor: Black, blue or red
-
PSE Stinger ATK Compound bow
₹38,500.00Add to cartThe new 2022 PSE Stinger ATK series delivers everything you need in a hunting bow without forcing you to pay for the things that you don’t.
Engineered on our all-new ATK platform for better stability and rigidity, the PSE Stinger ATK is smooth-drawing, hard-hitting, and deadly accurate.
If value performance is your priority, the Stinger ATK has been engineered to get the job done at the best price possible. ATK series bows are also equipped with PSE’s new stainless steel cable rod.
SPECIFICATIONS:
- Brace Height: 6.625″
- Axle To Axle: 32″
- IBO Rating: 312 fps
- Mass Weight: 4 LB
- Draw Length Range: 23″ – 30″
- Draw Weight (LB): 50, 60, 70
- Colour: Black, Charcoal, Truetimber Strata, Mossy Oak Country
-
Topoint M1 Compound Bow
₹23,500.00Add to cartThe Topoint M1 compound bow is fully adjustable and is an ideal first bow.
It features the M1 cam system that adjusts draw length from 19-30″ and approximately 25lb of adjustment at each draw length setting.
Each full turn on the limbs bolts adds approximately 3lb to the draw weight.
SPECIFICATIONS:
- Speed (IBO): 320 fps
- Weight: 3.31 lb
- Brace Height: 7″
- Axle to Axle: 28″
- Let Off: 80%
- Draw Length Range: 19″ – 30″
- Draw Weight:19 – 70lb
- Colours available: Black, Camo and Tactical
-
Darton Vegas E-3D Compound Bow
Add to cartDarton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Recently Viewed Products
-
TRU Ball Stinger XT Wrist Release
₹6,500.00
-
Win & Win WS600 Recurve Sight
₹19,000.00
-
Kinetic Novana V2 23" Recurve Riser
₹17,500.00
-
Shibuya Ultima RC Pro 520-9-B Sight Single Mount
₹42,500.00
-
Kinetic Scopus Recurve Riser
₹17,100.00
-
PSE Dominator Duo Compound Bow - 38 - SE Cam
Reviews
There are no reviews yet.