Mathews TRX Compound Bow
₹145,000.00
Built off of the proven design of the longer TRX models, the 38 inch axle-to-axle TRX 38 fills the void perfectly for shooters looking for a shorter, lighter, more comfortable bow for their draw length.
Draw lengths range 23 inches to 30 inches and draw weight goes from 50 pounds up to 70 pounds on the new TRX 38. The new 70V percent mod gives shooters a deeper valley while the 80 and standard 70 percent mods remain an option. A true-centre nocking point ensures straight and level nock travel, further enhancing shot-to-shot consistency and a 7.5-inch brace height provides unmatched forgiveness.
FEATURES:
- Design based on successful TRX bows
- True-centre nocking point
- More comfortable draw at shorter draw lengths
SPECIFICATIONS:
- Axle-to-Axle: 38″
- Brace Height: 7.5″
- Bow Rating: 328 fps
- Draw Length: 23″ – 30″
- Draw Weight: 50 lb, 60 lb
- Mass Weight: 4.86 lb
- Hand: Right or Left Handed
- Colour: Black, Blue, Red, White, Yellow
Related products
Darton Vegas E-3D Compound Bow
Add to cartDarton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Hoyt Concept X 37 Compound Bow
₹175,000.00Add to cartThe Hoyt Concept X 37 and 40 represent the exceptional engineering archers expect from Hoyt.
With a riser, limb system, and cam system all designed to complement each other, the Concept X gives shooters an extremely stable foundation for seeking out target archery perfection.
Starting with a riser that minimizes rotational translation, adding a limb system that is the most torsionally stable Hoyt have ever designed, and wrapping it up with the SCTR cams – the culmination of two decades of Hoyt Cam & 1/2 and HB cam systems rolled into one.
The Concept X beats the standards you expect from Hoyt.
Fresh colors just in.
All the classics and some funky new additions, including color-changing Skeeter and Blue on Black.
Also available in matte powder coat colors: Blackout, Bourbon, Tombstone, and Wilderness.
Limb options include black satin, white gloss, and black gloss. Up-charge may apply for gloss limbs.
What makes Concept X so good:
Hold to a higher standard
Concept X carries the torch with Hoyt’s proven Modular Grip System.
This patented design allows archers to choose between grip plates at 0 (standard), 4 or 8 degree angled grip plates, along with a version of each grip angle in a plate that reduces draw length by 1/8″, allowing the archer to fine tune draw length without changing the tune of the bow.
Feels like a Winner
Hoyt conducted a full-scale study of dynamic bow alignment to improve the natural aim of our latest premier target compound bows.
Testing revealed that Concept X has the lowest rotational translation of every bow included in the test from all major manufacturers.
This gives the shooter a bow that points more naturally at full draw and has less horizontal nock travel when returning to brace.
Concept X aids shooters in maintaining natural bow-to-target alignment without manipulating the grip or creating forces that work against the shooter’s natural aiming pattern throughout the draw cycle and shot.
Addressing how the bow aligns at brace throughout the shot process and how the bow drives the arrow nock through the shot cycle vastly improved tunability across different arrow spines and diameters.
Concept X is also more natural to hold when shooting up and down hills and inherently less critical to negative inputs.
Basically, it’s less stress, more X.
SCTR Cam System
The SCTR Cam system (pronounced “Sector”) combines the best of Hoyt Cam & 1/2 technology with modern Hoyt HB cam systems to deliver a shooting system that enhances the shooter experience in every way.
Borrowing qualities from one of their most winning SVX cam systems, the SCTR cam system takes those qualities and improves performance by delivering fine-tuned “feel” adjustments that shooters can easily perform.
A larger, stronger, more rigid 1/4″ threaded axle system stiffens the overall system, enhances cam bearing life, and works in tandem with TXL limbs to deliver maximum performance and efficiency while also delivering ultimate stability.
It also happens to be quieter and shoots with far less vibration.
TXL Limbs – The Drivetrain of Concept X
The new TXL limb is engineered to work harmoniously with the new SCTR cam system. By developing them as a system, we achieved the most efficient and stable limb we’ve ever built.
- Most torsional stability of any Hoyt target bow limb
- Shortest Hoyt Target Limb
- Length and flex profile optimized for SCTR Cam System
- Improves, efficiency, shot experience and string angle
Concept X Highlights:
- Longest Hoyt riser ever. Nearly 3 inches longer than Stratos.
- Least rotational translation of any Hoyt target bow. This equals better tuning across arrow spines and diameters, and more forgiveness to the shooter.
- SCTR Cam System Drag Race speeds with the ultimate in full draw adjustability – perfectly dial in draw length, holding weight and valley.
- New CDM Mods Maximum efficiency across a rotating, draw-length adjustable module.
- New SPEC Mods Ultimate in performance with exacting specifications and +/- .25″ draw length adjustments.
CONCEPT X 40 CONCEPT X 37 CONCEPT FX FPS (ATA) 327 330 332 AXLE-TO-AXLE 40″ 37″ 34″ BRACE HEIGHT 7.25″ 7″ 6.25″ MASS WEIGHT (LBS) 4.9 4.75″ 4.45″ DRAW LENGTH (SPEC MOD) 26″ – 32″ 25″ – 31″ 23.5″ – 29.5″ DRAW LENGTH (CDM MOD) 27″ – 30″ 26″ – 29″ 24.5″ – 27.5″ Shootdown Compound Bow – PSE Archery
Add to cartThe best of both worlds come together to forge the new 2023 PSE Shootdown Pro.
Thanks to PSE’s newly-designed riser geometry, the Shootdown Pro deftly exceeds the high performance, repeatability, and holding standards that target shooters need to compete at a high level, while also delivering the speed and comfort bowhunters need to get the job done on the hunt.Packed with PSE’s industry-leading technology, the Shootdown Pro is available in PSE’s latest cam options for competition or hunting, giving you all the adjustability, consistency, or power you need. This bow also comes equipped with the EZ.220 Snap Spacer System for rapid bow tuning, PSE’s widest, most-stable limb pockets to date, and the new Traxion Tech Grip for ideal comfort, accuracy, and hand placement.
The Shootdown Pro also features PSE’s proprietary Full Draw Stability (FDS) System, providing the most stable shooting experience possible, resulting in a platform you must shoot to believe.
Specifications:
Brace Height: 7″
Axle to Axle: 36″
ATA/IBO Speed: 345 FPS
Mass Weight: 4.7 LBS
Draw Length Range: 27″ – 31″
Draw Weights (LBS.): 50, 60, 70
CAM: S2Colour Options: First Lite Fusion, Green, Tan, Kuiu Verde, Blue, Grey, Red, White
Sanlida Hero Compound Bow
₹60,500.00Add to cartHero X10 is an intermediate target compound bow.
FEATURES:
- Riser machined from Forged 6061 T6 aluminum and newly designed shoot-thru construction
- 40″ ATA length provides more stability
- 7.5″ brace height will generate more forgiveness
- The split limbs are made of high modulus US Gordon fiber
SPECIFICATIONS:
- Axle-to-Axle: 40”
- Brace Height: 7.5”
- Draw length: 27-29.5”
- Let-Off: 70%-75%
- Arrow Speed: 330FPS
- Net Weight: 4.6Lbs
- Cam 1: 27″-29.5″
- Cam 2: 29″-32″
Recently Viewed Products
-
Hoyt Concept X 37 Compound Bow
₹175,000.00
Reviews
There are no reviews yet.