- Sorry, this product cannot be purchased.
Related products
-
Beiter Nocks In-Out
Add to cartThe Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminium-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.
Some features of the Beiter InOut-Nock, that distinguish them from other makes:
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X..S and 2X..L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length.
-
Beiter Pin Nock – Hunter
Add to cartWerner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
-
Shibuya Ultima CPX 3 Compound Sight
Add to cartThe All New Ultima 3 From Shibuya Is Now Available In Both Left And Right Handed, With A Selection Of 4 Different Colours.
This New Model Change Is Designed To Bring Over A Few Of The New Features From The PRO Sights, And Increase Part Compatibility Across The Line.
The CPX 3 Sights Feature The 4″ Elevation Bar From The CP PRO, And Are Compatible With The Laser-Engraved Metal Sight Scales.
In The RC 3 Sights, You Will Find The 5.2″ Elevation Bar, As Well As The Knurled Sight Pin Locking Knob From The RC PRO Sights.
Both Of These Sights Feature A New, Ambidextrous Mounting Block, Which Reduces The Amount Of Overhang From Certain Risers.
-
Darton Vegas E-3D Compound Bow
Add to cartDarton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Reviews
There are no reviews yet.