Darton Vegas E-3D Compound Bow
Darton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Related products
-
CORE Zeal – 30-45 lbs – Compound Bow
Add to cartAn exciting bow for beginners! – The CORE Zeal compound bow.
CORE’s new compound bow Zeal is without a doubt an amazing entry-level bow. Of course, all shooters must decide for themselves which bow is perfect for them, but already at first glance, the Zeal really seems quite impressive. With a length of 38.75 inches (approx. 98cm) – measured from axle to axle – and a relatively large brace height of 7.75 inches, the bow can be drawn very comfortably and also forgives one or two mistakes in the shot process. Due to the relatively large distance between the cams, the angle on the drawn string is large enough to safely shoot the bow both with a mechanical release and with bare fingers as well.
With a weight of only 1700g and a let-off of 70%, the Zeal makes it quite easy for any beginner to hold the fully drawn bow and concentrate on the target.Even when it comes to the adjustment options, the bow makes it easy for the shooter. The draw weight can be adjusted between 30 and 45 lbs and the draw length between 23 and 30 inches without needing a bow press. The draw weight is adjusted via the limb screws, which can be loosened up to 7 full turns counterclockwise.
The bow is fitted with all mounting options for accessories, including D-Loop as well as Peep sight, and ready to make your entry into archery child´s play.
Available as a right-handed model only.
Specifications:
Draw weight: 30-45 lbs
Draw length: 23-30″
Brace height: 7.5″
Let-Off: 70%
Length (axle-to-axle): 38.75″ (approx. 98 cm)
Weight (without mounting parts): approx. 1.7 kgColor: Black, blue or red
-
Sanlida Hero Compound Bow
₹60,500.00Add to cartHero X10 is an intermediate target compound bow.
FEATURES:
- Riser machined from Forged 6061 T6 aluminum and newly designed shoot-thru construction
- 40″ ATA length provides more stability
- 7.5″ brace height will generate more forgiveness
- The split limbs are made of high modulus US Gordon fiber
SPECIFICATIONS:
- Axle-to-Axle: 40”
- Brace Height: 7.5”
- Draw length: 27-29.5”
- Let-Off: 70%-75%
- Arrow Speed: 330FPS
- Net Weight: 4.6Lbs
- Cam 1: 27″-29.5″
- Cam 2: 29″-32″
-
Hoyt Stratos 36 SVX Compound Bows 2024
Add to cartThe Hoyt Stratos is born from a pedigree of Hoyt target bows that have set the bar for target bow design across the archery world. Legendary Hoyt tournament bows such as the Ultra Elite, Vantage Elite, Contender, Prevail, Invicta, and many others, have laid the foundation for the next-generation of record breaking performance. Hoyt Stratos offers unrivaled adjustability and customization for optimal personalized performance and a new benchmark in bow design.
High-performance SVX cams feature interchangeable modules for increased efficiencies and speeds up to 328 fps. The SVX cam has a hard wall and is “ready to go” at full draw for those who pull hard through the shot.
Hoyt’s Shoot-Thru TEC risers are unmatched in stiffness and consistency, and now the Stratos combines a new geometry for even more forgiveness. A more neutral riser geometry shifts the center-of-gravity over the shooters hand which makes it point, aim and balance more naturally.
Where the rubber hits the road, the bow grip is make or break for comfort, forgiveness and accuracy. Hoyt’s patented Modular Grip System allows you to select a grip angle that feels and performs the best for you. Available in 0, +4 and +8 degree angles and in standard height and +1/8” height to fine tune your draw length without adjusting strings and cables.
Stratos 36 SVX draw length options:
Cam 1: 23.5″ – 25.5″
Cam 2: 26″ – 27″
Cam 3: 27.5″ – 28.5″
Cam 4: 29″ – 30″
Cam 5: 30.5″ – 31″
Specifications Of The Stratos 36 With SVX Cam:
- 332 fps
- 36″ axle-to-axle
- 7″ brace height
- 4.65lbs mass weight
- 23.5-31″ draw length range
- 30-70lbs draw weight range
- 70% let-off
- choice of 6 cerakote colours
*Contact us if you require any specs we don’t list and we’ll try our best to order in the bow you need*
-
Hoyt Stratos 40 SVX Compound Bows
Add to cartThe Hoyt Stratos is born from a pedigree of Hoyt target bows that have set the bar for target bow design across the archery world. Legendary Hoyt tournament bows such as the Ultra Elite, Vantage Elite, Contender, Prevail, Invicta, and many others, have laid the foundation for the next-generation of record breaking performance. Hoyt Stratos offers unrivaled adjustability and customization for optimal personalized performance and a new benchmark in bow design.
High-performance SVX cams feature interchangeable modules for increased efficiencies and speeds up to 328 fps. The SVX cam has a hard wall and is “ready to go” at full draw for those who pull hard through the shot.
Hoyt’s Shoot-Thru TEC risers are unmatched in stiffness and consistency, and now the Stratos combines a new geometry for even more forgiveness. A more neutral riser geometry shifts the center-of-gravity over the shooters hand which makes it point, aim and balance more naturally.
Where the rubber hits the road, the bow grip is make or break for comfort, forgiveness and accuracy. Hoyt’s patented Modular Grip System allows you to select a grip angle that feels and performs the best for you. Available in 0, +4 and +8 degree angles and in standard height and +1/8” height to fine tune your draw length without adjusting strings and cables.
Stratos 40 SVX draw length options:
Cam 1: 24.5″ – 26.5″
Cam 2: 27″ – 28″
Cam 3: 28.5″ – 29.5″
Cam 4: 30″ – 31″
Cam 5: 31.5″ – 32″
Long Draw Option: 32.5″ – 33″
Specifications Of The Stratos 40 With SVX Cam:
- 327 fps
- 40 1/8″ axle-to-axle
- 7 1/16″ brace height
- 4.9lbs mass weight
- 24.5-33″ draw length range
- 30-70lbs draw weight range
- 70% let-off
- choice of 6 cerakote colours
*Contact us if you require any specs we don’t list and we’ll try our best to order in the bow you need*
Reviews
There are no reviews yet.