Category
- Archery
- Shooting
- Bicycle
- Crossbows
- Badminton
- Wayfaring
- Athletics
- Basketball
- Board Games
- Boxing
- Carrom
- Gym and Fitness Equipment
- Gymnastic
- Handball Equipment
- Pool and Snooker Tables
- Primary Education Equipment
- Sports Nets
- Sports Training Equipment
- Table Tennis
- Yoga
- Sorry, this product cannot be purchased.
Darton Vegas E-3D Compound Bow
Darton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Related products
-
Fivics Aegis Hard Case
Add to cartHigh quality hardcase that can hold up to two recurve bows and their accessories.
Multiple internal zipped pockets to keep gear organised.
FEATURES:
- Strong sturdy, drop resistant case
- Specially designed wheels
SPECIFICATIONS:
- Size: 33″ x 15″ x 10″
- Material: ABS
- Recommended maximum weight: 23kg
- Colours: Black, Blue, Red, White, Orange
**Important Notice**
The case come fitted with a protective clear film, to keep the case free from Scratches in transit, this can be peeled off the case before use. -
Mathews Title Compound Bow
Add to cartEngineered to the uncompromising standards of the best target archers in the world, the 2024 Mathews TITLE equipped with the all-new Bridge-Lock Carbon Targets Bars, SwitchWeight Cams and MATCH Bowstrings resulted in the most accurate competition system to ever stand on the target line.
Years of research and collaboration with the world’s best archers allowed us to bring meaningful innovation to the riser design, limbs, cams, bars and new strings and cables.
Every technology and detail in the TITLE is aimed at making the most stable, most repeatable, and most accurate bow we’ve ever designed.
SWITCHWEIGHT™ CAM
Programmed to deliver maximum efficiency and an ultra-smooth draw cycle, the new SWT Cam offers a solid, locked-in feel at full draw which results in unrivaled repeatability on the range. Built compatible with our revolutionary Switchweight® Mods which are specifically optimized at each draw length, draw weight and let-off to maximize performance for every archer.
NEW BRIDGE-LOCK™CARBON TARGET BAR
The new Bridge-Lock Carbon Target Bars redefines what can be expected from a stabilizer. This first-of-it’s-kind machined carbon bar creates a more rigid connection to the bow By designing the bar with the small lateral footprint and a skeletonized frame, we were able to decrease wind drag up to 36% over bars of the same length. Featuring our patent pending Interlink™ Weight Technology and a quick-disconnect knob allowing adjustability in 1/2″ increments, the Bridge-Lock™ offer a new level of harmonic tuning and customization in a single bar.
ANCHOR WEIGHT™SYSTEM
Optimizes the center of gravity of the TITLE by focusing the weight of the bow below the grip. Made from eight ounces of solid brass, the removable Anchor™ Weight provides a more balanced and stable hold to deliver an enhanced post-shot feel.
Specifications:
- Brace Height: 7″
- Draw Weights: 50, 55, 60, 65 & 70 lbs
- Mass Weight: 4.56 lbs
- IBO Rating: Up to 330 fps
- Draw Length Range: 26″ to 31.5″
- Axle-to-axle: 36 or 38″
- Let-Off: 70, 75 or 80%
- Cam: Switchweight W/Perimeter Weight Technology
-
Hero X10 II – Compound bow
₹60,500.00Add to cartSANLIDA Hero X10 II – Compound bow – 30-60 lbs
- Riser CNC-milled from highly stable 6061-T6 aluminum and in the newly developed Shoot-Thru design
- Split limbs made of high-quality Gordon fiberglass for ultimate performance
- Interchangeable modules for adjusting the draw length included in the scope of delivery
- Extremely precise and forgiving shooting characteristics
- Fast and lightweight Hero Cam system
- Sturdy back plate
- Perfectly anodized surfaces
Technical data:
- Length (axle to axle): 40 inches / approx. 101.6cm
- IBO speed: 320 fps / approx. 351 km/h
- Brace height: 7.2 inches / approx. 18.3cm
- Weight: 4.7 lbs / approx. 2130g
- Draw length: 24.5-27.0 inch, 26.5-29.5 inch or 29.0-32.0 inch
- Draw weight: 30-40, 40-50 or 50-60 lbs
- Let-Off: 72%
Scope of delivery:
1x Compound bowCharacteristics
-
Mission Switch Compound Bow
Add to cartThe Mission Switch is the most versatile platform in the Mission line up.
Featuring a completely re-designed cam system with new Fast Fit technology, the Switch is highly adjustable for maximum performance throughout a variety of draw weights and lengths.
The ergonomic riser, paired with a slim grip design, provide unmatched shootability in a streamlined package. It measures 31″ axle-to-axle for a stable shooting platform and a generous string angle for archers on all ends of the draw length spectrum.
The new cam system is heavily inspired by Mission’s high-end, award-winning Crosscentric Cam technology, while maintaining the ability to easily adjust draw length from 18 inches all the way up to a 30″ draw.
SPECIFICATIONS:
- Axle To Axle: 31″
- Brace Height: 6 7/8″
- IBO Rating: 305 fps
- Draw Length: 18 – 30″
- Draw Weight: 11 – 70 lb
- Mass Weight: 3.84 lb
- Style: Right Handed, Left Handed
- Colour: Black, Camo
Reviews
There are no reviews yet.