Beiter Winder Serving Tool
₹3,500.00
The Beiter WINDER – developed in several years of testing. One of the aims, was to design an efficient tool to be easily used by professionals or beginners.
Beiter Winder:
Not only it is important that a serving tool simply serves the yarn on a string: it is much more important, HOW this is done!
The yarn must have a smooth guidance; friction and tension must be adjusted extremely fine.
This is possible thanks to the Beiter Winder.
A unique feature of the Beiter Winder is also that the yarn must not be threaded through an eye: thanks to an innovative slot you have only to clip in the yarn!
Another unique property of the Beiter Winder is that you can change the spool within seconds.
Beiter Winder Profi:
All the already known features of the Winder will remain the same also for the Winder PROFI: Easy clip in system for the yarn, extraordinary smooth guidance, unique sliding of the disks, highest precision and guidance, extremely fine adjustable friction and tension, easy and fast exchangeable serving spool…
The Winder PROFI is heavier due to the stainless steel rolls: therefore, higher centrifugal forces while working allow tighter serving than with the standard Winder!
Beiter Winder Profi X-Heavy:
The already known features of the other Winder models are also available: Easy clip in system for the yarn, extraordinary smooth guidance, unique sliding of the disks, highest precision and guidance, extremely fine adjustable friction and tension, easy and fast exchangeable serving spool…
The Beiter Winder PROFI Series can be used in combination with the Beiter Twister.
The Winder PROFI Series are an ideal tool for all professional string makers and Compound archers looking for hard servings!
The Beiter Winder PROFI HEAVY has 15mm stainless steel knobs on the spindle, instead of the 9mm ones. A small but significant change!
Features:
- Easy clip in system for the yarn
- Extraordinary smooth guidance.
- Unique sliding of the disks, thanks to a new material combination.
- Exchangeable gliding-disks: the one to be normally used on american spools (disks with pins), the others for example on Angel serving material (disks with no pins). This will allow highest precision and guidance.
- Extremely fine adjustable friction and tension, thanks to the mounted puffs. (O-Ringe).
- Easy and fast exchangeable serving spool.
Related products
-
452X BCY Bowstring Material
₹8,500.00Add to cart452X Bowstring: 67% SK75 Dyneema®, 33% Vectran, good arrow speed.
More strand count flexibility and better looking two colour strings. No creep; completely stable. Available in all colours.\
FEATURES:
- No creep
- Completely stable
- Available in all colours
SPECIFICATIONS:
- Recommended strands: 20-24 for Compound Bows
- Approximate feet per pound waxed: 8,800
- Spool sizes: 1/8 lb, 1/4 lb, or 1 lb
-
Beiter Nocks In-Out
Add to cartThe Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminium-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.
Some features of the Beiter InOut-Nock, that distinguish them from other makes:
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X..S and 2X..L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length.
-
8125 BCY Bowstring Material
₹7,500.00Add to cart100% SK75 Dyneema® fibre. Highest speed and higher durability.
Preferred by some compound shooters, particularly for 3D. Also the choice of Olympic style recurve shooters worldwide. Available in all colours.
FEATURES:
- Strong and durable
- Very low creep
- Available in all colours
SPECIFICATIONS:
- Recommended strands: 12-18
- Approximate feet per pound waxed: 8,200
- Spool sizes: 1/8 lb, 1/4 lb, or 1 lb
-
Beiter Tool Clip Set
Add to cartThe Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).Not only – and much more important! – it allows to “compact“ the serving.
Uses:
- Split a string for Peep-Sight installation;
- Easily count the number of strands of your string;
- Determine the middle of the string by counting the strands so ensuring that the Peep-Sight is in the center of your string;
- Start serving extremely simply and quickly;
- Serve a Beiter nocking point more easily, defining the correct starting position;
- Use the String-Tool as a lever to ease off a rest or glue from your bow
Recently Viewed Products
-
Avalon tyro side-quiver
₹1,600.00
Reviews
There are no reviews yet.