Beiter Pin Nock – Hunter
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.
- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
Related products
-
Beiter Nocks In-Out
Add to cartThe Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminium-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.
Some features of the Beiter InOut-Nock, that distinguish them from other makes:
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X..S and 2X..L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length.
-
Easton G Nock
₹1,500.00Add to cartPrecision-moulded & Press-fit indexable.
Fits UNI Bushing (See arrow models for suitability)
4mm Insert size
Available with 2 different groove sizes:
- Large groove generally used for compounds
- Small groove for recurves.
- 12 nocks per pack.
-
Beiter Compound Rest
Add to cartWhen you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
INCLUDED:- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
Reviews
There are no reviews yet.