- Sorry, this product cannot be purchased.
Beiter Pin Nock – Hunter
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.
- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
Related products
-
Beiter Clicker
Add to cartThe Beiter clicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all risers on the market, due to the different available models.
Different colours of the clicker Blade and many different components can individually adapt the clicker to the archer’s needs.FEATURES:
- Two different Blade colours – Chromed or Black Blade.
- Three different threads – metric and inch – for all common handles.
- Three different plate-thicknesses – 0.20mm/0.25mm/0.30mm – for the archer’s individual “sound-feeling”! (0.25mm Standard, other sizes Special Order Only)
- Two different colours for wheel and screw-washer – Black (Standard) and Light(Special Order Only)
- Straight (Standard) or Bent (Special Order Only) clicker-plates, as requested
- For all available handles.
-
Beiter Compound Rest
Add to cartWhen you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
INCLUDED:- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
-
Beiter Pin-Out Nocks X10
₹2,650.00Add to cartAfter the first Insert-Nock, the first Out-Nock and the first InOut-Nock for target archery, Werner Beiter designed also the first PinOut-Nock!
The inner diameter of the Beiter PinOut-Nock fits precisely on to the related pin and the shafts end preserves thanks to the bigger outer diameter.
-
Jet6 Vanes
Add to cartKSL Jet6 Vane is developed, inspired by world’s top level coach Kisik Lee, and unparalleled in performance upon its unique technologies and design.
KSL Jet6 Vanes are result of long period of development inspired by Coach Kisik Lee’s research and coaching experience.
KSL Jet6 Vanes will show unparalleled performances that have not been witnessed in any other vanes. As an archery coach, I firmly believe that this newest technology embedded in KSL Jet6 Vanes will increase average scores of all archery competitors worldwide. I expect new world records set with KSL Jet6 Vanes. I truly believe that KSL Jet6 Vanes will help improving personal best scores for all levels of competitors.
As an engineering expert, Professor Woongchul Dan Choi, provides his analysis on how KSL Jet6 Vanes improve the flight of arrow.
KSL Jet6 Vanes are designed with close attention to the aerodynamic research. It is very important to control the flow field around vanes to stabilize the flight of arrow.
The developer architected six airways on the vane. Inner flows created by additional three airways pull the entire vortex structure to be converged. This effect ultimately reduces the drag force and alleviates the archer’s paradox quickly. As a result, you will get a stable formation of arrow impact points.
Available optionsSize: 1 3/4″ and 2″
Handedness: RH and LH
General guide for size selection
1 3/4″: Junior or female archers in recurve, or compound archers
2″: Male archers or who uses arrows over 28.5″
Note. This is just a general guide and does not fit to all. It is recommended to try both sizes to find best fit in individual applications.
Recently Viewed Products
-
Vanguard Vesta 560A
-
Avalon Classic HD Brass Tab
Original price was: ₹2,800.00.₹2,650.00Current price is: ₹2,650.00.
Reviews
There are no reviews yet.