- Sorry, this product cannot be purchased.
Beiter Compound Rest
When you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
Related products
-
Beiter Pin Nock – Hunter
Add to cartWerner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
-
-
Avalon Bow Bunker Lite Compound Case
Add to cartThe Avalon bow bunker lite is a fantastic rugged compound hard case at a competitive price.
Interior is fitted with foam padding in the bottom and pre-cut foam in the lid for arrow storage. For archers wanting to transport their bow by air, there is an air pressure valve to equalise the pressure and prevent damage to the case.
Externally the are 4 heavy duty locking clasps and moulded holes for securing padlocks, two carry handles and two wheels for easy transportation.
- Internal dimensions: 113cm x 46cm x 18cm
- Weight approximately: 8kg
- heavy duty locking clasps
- Pre-cut foam arrow storage located in the lid
- Built in air pressure valve
-
Shootdown Compound Bow – PSE Archery
Add to cartThe best of both worlds come together to forge the new 2023 PSE Shootdown Pro.
Thanks to PSE’s newly-designed riser geometry, the Shootdown Pro deftly exceeds the high performance, repeatability, and holding standards that target shooters need to compete at a high level, while also delivering the speed and comfort bowhunters need to get the job done on the hunt.Packed with PSE’s industry-leading technology, the Shootdown Pro is available in PSE’s latest cam options for competition or hunting, giving you all the adjustability, consistency, or power you need. This bow also comes equipped with the EZ.220 Snap Spacer System for rapid bow tuning, PSE’s widest, most-stable limb pockets to date, and the new Traxion Tech Grip for ideal comfort, accuracy, and hand placement.
The Shootdown Pro also features PSE’s proprietary Full Draw Stability (FDS) System, providing the most stable shooting experience possible, resulting in a platform you must shoot to believe.
Specifications:
Brace Height: 7″
Axle to Axle: 36″
ATA/IBO Speed: 345 FPS
Mass Weight: 4.7 LBS
Draw Length Range: 27″ – 31″
Draw Weights (LBS.): 50, 60, 70
CAM: S2Colour Options: First Lite Fusion, Green, Tan, Kuiu Verde, Blue, Grey, Red, White
Recently Viewed Products
-
Easton Club XT Backpack
₹7,800.00
Reviews
There are no reviews yet.