Beiter Compound Rest
When you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
Related products
-
Tec-X Compound Case with wheels – Avalon
Add to cartThe easiest way to travel with your bow.
With 2 wheels for easy carrying – Could fit 1 or 2 bowsDimensions: 116cm L x 41cm W x 24cm D
Color: Black
Interior padding for protection
Including name tag
Multiple acessories pockets inside
Lower corner protection
Separate stabilizer storage
Double strap system to secure bows
1 external large pocket -
Hoyt Stratos 40 SVX Compound Bows
Add to cartThe Hoyt Stratos is born from a pedigree of Hoyt target bows that have set the bar for target bow design across the archery world. Legendary Hoyt tournament bows such as the Ultra Elite, Vantage Elite, Contender, Prevail, Invicta, and many others, have laid the foundation for the next-generation of record breaking performance. Hoyt Stratos offers unrivaled adjustability and customization for optimal personalized performance and a new benchmark in bow design.
High-performance SVX cams feature interchangeable modules for increased efficiencies and speeds up to 328 fps. The SVX cam has a hard wall and is “ready to go” at full draw for those who pull hard through the shot.
Hoyt’s Shoot-Thru TEC risers are unmatched in stiffness and consistency, and now the Stratos combines a new geometry for even more forgiveness. A more neutral riser geometry shifts the center-of-gravity over the shooters hand which makes it point, aim and balance more naturally.
Where the rubber hits the road, the bow grip is make or break for comfort, forgiveness and accuracy. Hoyt’s patented Modular Grip System allows you to select a grip angle that feels and performs the best for you. Available in 0, +4 and +8 degree angles and in standard height and +1/8” height to fine tune your draw length without adjusting strings and cables.
Stratos 40 SVX draw length options:
Cam 1: 24.5″ – 26.5″
Cam 2: 27″ – 28″
Cam 3: 28.5″ – 29.5″
Cam 4: 30″ – 31″
Cam 5: 31.5″ – 32″
Long Draw Option: 32.5″ – 33″
Specifications Of The Stratos 40 With SVX Cam:
- 327 fps
- 40 1/8″ axle-to-axle
- 7 1/16″ brace height
- 4.9lbs mass weight
- 24.5-33″ draw length range
- 30-70lbs draw weight range
- 70% let-off
- choice of 6 cerakote colours
*Contact us if you require any specs we don’t list and we’ll try our best to order in the bow you need*
-
-
Beiter Nocks In-Out
Add to cartThe Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminium-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.
Some features of the Beiter InOut-Nock, that distinguish them from other makes:
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X..S and 2X..L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length.
Reviews
There are no reviews yet.