Beiter Clicker
The Beiter clicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all risers on the market, due to the different available models.
Different colours of the clicker Blade and many different components can individually adapt the clicker to the archer’s needs.
FEATURES:
- Two different Blade colours – Chromed or Black Blade.
- Three different threads – metric and inch – for all common handles.
- Three different plate-thicknesses – 0.20mm/0.25mm/0.30mm – for the archer’s individual “sound-feeling”! (0.25mm Standard, other sizes Special Order Only)
- Two different colours for wheel and screw-washer – Black (Standard) and Light(Special Order Only)
- Straight (Standard) or Bent (Special Order Only) clicker-plates, as requested
- For all available handles.
Related products
Beiter Compound Rest
Add to cartWhen you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
INCLUDED:- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
Beiter Pin Nock – Hunter
Add to cartWerner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
Beiter Winder Serving Tool
₹3,500.00Add to cartThe Beiter WINDER – developed in several years of testing. One of the aims, was to design an efficient tool to be easily used by professionals or beginners.
Beiter Winder:
Not only it is important that a serving tool simply serves the yarn on a string: it is much more important, HOW this is done!
The yarn must have a smooth guidance; friction and tension must be adjusted extremely fine.
This is possible thanks to the Beiter Winder.
A unique feature of the Beiter Winder is also that the yarn must not be threaded through an eye: thanks to an innovative slot you have only to clip in the yarn!
Another unique property of the Beiter Winder is that you can change the spool within seconds.
Beiter Winder Profi:
All the already known features of the Winder will remain the same also for the Winder PROFI: Easy clip in system for the yarn, extraordinary smooth guidance, unique sliding of the disks, highest precision and guidance, extremely fine adjustable friction and tension, easy and fast exchangeable serving spool…
The Winder PROFI is heavier due to the stainless steel rolls: therefore, higher centrifugal forces while working allow tighter serving than with the standard Winder!
Beiter Winder Profi X-Heavy:
The already known features of the other Winder models are also available: Easy clip in system for the yarn, extraordinary smooth guidance, unique sliding of the disks, highest precision and guidance, extremely fine adjustable friction and tension, easy and fast exchangeable serving spool…
The Beiter Winder PROFI Series can be used in combination with the Beiter Twister.
The Winder PROFI Series are an ideal tool for all professional string makers and Compound archers looking for hard servings!
The Beiter Winder PROFI HEAVY has 15mm stainless steel knobs on the spindle, instead of the 9mm ones. A small but significant change!
Features:
- Easy clip in system for the yarn
- Extraordinary smooth guidance.
- Unique sliding of the disks, thanks to a new material combination.
- Exchangeable gliding-disks: the one to be normally used on american spools (disks with pins), the others for example on Angel serving material (disks with no pins). This will allow highest precision and guidance.
- Extremely fine adjustable friction and tension, thanks to the mounted puffs. (O-Ringe).
- Easy and fast exchangeable serving spool.
- Easy clip in system for the yarn
Avalon Tec One Field Quiver
Add to cartTec one field quiver revisited is a great entry level quiver which offers a simple yet effective design and also includes a matching belt.
The design of a field quiver positions the arrows pointing backwards and reduces the risk of snagging your arrows on undergrowth, whilst shooting on field courses.
The tec one field quiver is robust and lightweight, with a large storage pocket on the side, pen slot, t-gauge storage and two metal D-rings for hanging accessories from. The Quiver has three separated compartments for you arrows.
SPECIFICATIONS:
- New diamond-weaved fabric.
- Two sound damping arrow separators prevent arrow rattling.
- Two zipper pockets, two slide pockets, D-loop rings and a slot for your pen.
- Including matching belt.
- Weight: 530g.
- Length: 43cm.
- Available in 9 vibrant colors.
Reviews
There are no reviews yet.