Beiter Compound Rest
When you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
Related products
Axcel Achieve XP Carbon Compound Sight
Add to cartThe Achieve Xtra Performance compound sight.
The Achieve XP features a new ultra-high modulus carbon bar that is 2x stronger and contains thicker layers of carbon. The all new wedge lock bow mount bracket is hands down stronger than any other on the market (patent pending). In-line tension adjustment allows the sight pin to stay on target from shot to shot.
A Stronger 10-32 windage lead screw, enlarged diameter windage and elevation knobs with click locks and a thinner, weight-reducing elevation rail make for a hugely improved compound sight from Axcel. Metal sight tape option for compound models only (8 included, 20 sold separately) and ultra high modulus 6″ & 9″ bar available for compound sights.
Features:
- Ultra high modulus carbon bar
- New wedge lock bow mount bracket
- In-line tension adjustment
- Stronger 10-32 windage lead screw
- Enlarged diameter windage and elevation knobs with click locks
- Thinner, weight-reducing elevation rail
- Metal sight tape option for compound models only (8 included, 20 sold separately)
Darton Vegas E-3D Compound Bow
Add to cartDarton’s New Vegas-E 3D! THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!
The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.
The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas.
Features of the new Vegas-E 3D:
- 7075 aluminium cams
- 1/4″ axles
- 5/8″ bearings
- .790 limbs and limb pockets (add stability)
- new grip angle
Specifications:
- Speed: 310-315 fps
- Axle-to-axle: 37 1/2″
- Brace height: 7″
- Mass weight: 4.72 lbs
- Draw length: 25.5″ – 31″
- Draw weight: 40, 50, 60 & 70 lbs
- Let-off: 80% – adjustable
*All colours listed come with white limbs, except black, which is supplied with black limbs*
Hoyt Kobalt Compound Bow 2023
₹39,500.00Add to cartLoaded with Hoyt technology and built for young archers, the new Kobalt adjusts from 18” draw length all the way to 28” with increases in poundage from 7 lb to 45 lb. Kobalt is built for the long haul and is available in multiple colors including Bone Collector and Cameron Hanes Keep Hammering Editions.
The New Kobalt Compound Bow From Hoyt Is A Great Choice For The Growing Young Archer! The Bow Offers A Huge Range Of Adjustments With Through Both The Draw Length And Draw Weight.
Hoyt Kobalt Specifications:
- Axle-to-axle: 29 1/4″
- Brace Height: 6 7/8″
- Mass Weight: 2.8lbs
- Draw Length Range: 18″-28″
- Draw Weight Range: 7-45#
Draw Length / Weight Chart:
Draw Length Min # Max # 18″ 7lbs 22lbs 19″ 7lbs 25lbs 20″ 8lbs 29lbs 21″ 10lbs 32lbs 22″ 11lbs 35lbs 23″ 13lbs 38lbs 24″ 14lbs 40lbs 25″ 16lbs 41lbs 26″ 17lbs 43lbs 27″ 18lbs 44lbs 28″ 20lbs 45lbs Decut Suntec Arrow Rest
₹3,500.00Add to cartDecut Suntec Arrow Rest has Micro vertical and horizontal adjustment and adjustable blade angle.
Supplied with a lightweight 0.008″ blade as standard
Reviews
There are no reviews yet.