Category: Arrows / Arrow's Components
Showing 1–16 of 36 results
Avalon classic carbon arrow
Read more- Product: Avalon Classic Carbon Arrows Complete
- Material: Carbon
- Length: 30 inches (76 cm)
- Spine: Various options available (e.g., 400 , 500, 600, 700, 800, … 2000)
- Diameter: 5/16 inches (7.9 mm)
- Fletching: 3-inch vanes
- Nock: Standard insert
- Point: Field points included
- Straightness Tolerance: ±0.006 inches
- Weight Tolerance: ±2 grains
- Packaging: Set of [Specify Quantity] arrows with field points
- Application: Suitable for target shooting and hunting purposes
Avalon Hybrid Carbon Arrow
Read moreA full carbon arrow by Avalon, complete and ‘ready to use’ arrow with a fitted nock, point and fletchings.
Incredible arrow for the money, which makes it perfect for beginner sessions. The Avalon Hybrid is only available as a ‘ready to use’ arrow.
The supplied nock is a small groove G type nock, glued in one-piece point and 1.75″ plastic vanes*.
*Please note there is no choice on fletching/nock colours.
- 1500-2000 spine shafts include 50gr points
- 900-1300 spine shafts include 70gr points
- 500-800 spine shafts include 90gr points.
Arrow Spine Stock Length 2000 26″ 1800 27″ 1500 27″ 1300 28″ 1100 28″ 1000 29″ 900 29″ 800 30″ 700 30″ 600 31″ 500 31″ Beiter Nocks In-Out
Read moreThe Beiter InOut-Nocks fits precisely into the shaft and preserves the shafts end with the bigger outer diameter.
The InOut-Nock is available only for selected Aluminium-Carbon shafts, both in the Beiter patented ASYMMETRIC version, as well as in the SYMMETRIC type, for Compound archers using a D-Loop.
Some features of the Beiter InOut-Nock, that distinguish them from other makes:
- Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single InOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter InOut-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter InOut Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- The length difference between the Beiter InOut-Nock 2X..S and 2X..L is 4mm: you can slightly adjust the spine of your arrow, by changing the nock length.
Beiter Out Nocks X10
₹2,500.00Add to cartThe Beiter Out-Nock has been mainly designed for Carbon Arrowshafts, but can be used on some Aluminum-Carbon Arrows as well. The Beiter Out-Nock is available exclusively in the Beiter patented ASYMMETRIC shape.
Beiter Pin Nock – Hunter
Read moreWerner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market!
He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
#1 represents a small groove
#2 represents a large groove.- Each Nock size has only one single mould. This offers the highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
- The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
- The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
- The Beiter Pin-Nock can be shot without problem with all known nocking points, but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
- Beiter Pin-Nocks should fit an all Pins on the market so that all arrow available shafts can be used with the unique Beiter nock system.
Beiter Pin-Out Nocks X10
Read moreAfter the first Insert-Nock, the first Out-Nock and the first InOut-Nock for target archery, Werner Beiter designed also the first PinOut-Nock!
The inner diameter of the Beiter PinOut-Nock fits precisely on to the related pin and the shafts end preserves thanks to the bigger outer diameter.
Bohning Air Vanes
Read moreThe Air Vanes have the same ultra-low profile height as the Ice Vane, with an X-Vane Shield Cut inspired tail.
Features:
- Designed for field archery
- Great for long distances and lighter arrows
Specifications:
- Length: 2″
- Height: 0.3″
- Weight: 4.5 gr
- Pack of 12
- Colour: Black, Blue, Hot Pink, Neon Green, Neon Orange, Neon Red, Neon Yellow, Purple, Red, Satin Blue, White, Silver, Teal, American Flag, Camp Fire
Bohning Archery Feather Fletching Tape
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00.Add to cartCreates a strong, reliable bond on contact.
Easily applied.
One roll contains enough tape to fletch over 3 1/2 dozen arrows.
You will be amazed at how easy it is to use!
1 Roll = 720 inches or 1828 cmEaston Break Off Points HL 4mm
₹3,650.00Add to cart4MM HL Stainless Steel Break Off Points represent the high-performance offering covering Easton’s 4MM Target Shaft lineup.
Designed for use with Easton’s ACE and ProComp 4MM target arrows, the 4MM HL point features four different sizes to offer proper fit to varying diameters of arrows. An aerodynamic shape and a black nickel finish give the point the aesthetic desired by today’s intermediate to advanced level target archer. 4MM glue-in point designed to offer wide range of weight options with a premium finish aesthetic.
- Designed for use with Easton’s ACE and Pro Comp 4MM target arrows
- Four sizes: 80-130 grain with 10 grain break-off sections
- Black nickel finish
- Sold in dozen packs
Easton Break-Off Point – X10
Read moreBreak-off glue-in stainless steel target point for Easton X10 shafts.
FEATURES:
- Customise the point weight by removing 10 gr. pieces
- Available in 80-90-100 gr., 100-110-120 gr.
- 12 points per pack
Easton G Nock
Read morePrecision-moulded & Press-fit indexable.
Fits UNI Bushing (See arrow models for suitability)
4mm Insert size
Available with 2 different groove sizes:
- Large groove generally used for compounds
- Small groove for recurves.
- 12 nocks per pack.
Easton Nock Turner
₹800.00Add to cartAdjust your Easton nocks safely.
Available for:
- G nock (Green)
- Super nock (Orange)
- X or H nock (Blue)
- Micro Super nock (Red)
- Universal
