Category: --Archery
Showing 82–90 of 428 results
-
Axcel TriLock Off Set Mount
Read moreThese highly adjustable mounts allow an archer to fine-tune their bow to be balanced when at full draw.
There are three features that set our offset mounts apart from the competition! First, our patent-pending TriLock™ technology features three raised boss taper surfaces on the male connector resulting in superior contact between mated parts for a stronger connection.
An added Second Lock is provided by our Patent Pending AnchorGrip™ which adds biting teeth to give additional security that your bars will stay put and not loosen up. Second, the patent-pending AnchorGrip™ gives you a second lock for added security that your bars will not loosen up.
It adds biting teeth to grip the bars even stronger, yet allows easy adjustability! Third, our RodLock™ is a bar that wedges against the riser to make it virtually impossible for the mount to rotate or drop. Our TriLock™ Offset Mounts are built to be more solid and rigid than any other mounts in archery!
FEATURES:
- Mount attaches to lower riser mounting holes found on most modern bows or to the front stabiliser hole when using a quick disconnect on a hunting bow
- Features Anchor Grip™, Rod Lock™, and TriLock™ technologies
- Patent-pending TriLock™ technology features three raised boss taper surfaces on the male connector resulting in superior contact between mated parts for a stronger connection Like a three-legged stool on a cobblestone street, the TriLock™ taper design ensures superior contact where you need strength and stability most
- An added Second Lock is provided by our Patent Pending AnchorGrip™ which adds biting teeth to give additional security that your bars will stay put and not loosen up
- A Second Lock from our Patent Pending AnchorGrip™ adds biting teeth with easy adjustability to give you added security that your bars will stay put and not loosen up
- RodLock™ bar wedges against the riser to make it virtually impossible for the mount to rotate or drop
- Integrated CenterLock™ quick disconnect allows you to add and remove your stabiliser quickly for transport and easy storage
- Internal nut mounts flush with the quick disconnect for better visual appeal
- Laser engraved indicator lines for precise micro-adjustments
- Prevent rust with 5/16″-24 Stainless Steel Hardware
- Ambidextrous for RH/LH use
- CNC machined and assembled in Virginia! Made in the USA!
-
B55 BCY Bowstring Material B55
₹2,500.00Add to cart100% polyester similar to Dacron but with better durability and very low stretch.
Primarily used for recurves, but also used on older compound crossbows and traditional bows without reinforced limb tips. Available in all colours.
FEATURES:
- A little give which is kind to bows and to shooters
- Works well with WD75 serving material
- Available in all colours
SPECIFICATIONS:
- Recommended strands: 12-16 for recurves
- Approximate feet per pound waxed: 4,300
- Spool sizes: 1/4 lb, or 1 lb
-
BCY Bowstring Material 652 Spectra
Original price was: ₹4,650.00.₹4,500.00Current price is: ₹4,500.00.Add to cart652 Spectra Bowstring
Spectra bowstring, same as the original Fast Flight – still the choice of many recurve shooters worldwide. Available in solid colours.
FEATURES:
- Safe, reliable and durable
- The original HMPE (High Modulus Polyethylene) material.
- Available in solid colours
SPECIFICATIONS:
- Recommended strands: 18-22 for Recurve Bows
- Approximate feet per pound waxed: 8,200
- Spool sizes: 1/4 lb, or 1 lb
-
BCY Polygrip Centre Serving
Read more100% Polyester; grips very well. Standard Black / white colour.
Tough and durable, Resin coated and grips well and is very economical
FEATURES:
- Grips well
- Available in black / white
SPECIFICATIONS:
#1 .020″ Spool:
- Breaking strain: 35 lb
- Approximate feet per pound:4,600
- Spool sizes: 1 lb. or 75 yard jig
#2 .025″ Spool:
- Breaking strain: 50 lb
- Approximate feet per pound:3,600
- Spool sizes: 1 lb. or 60 yard jig
-
BCY Powergrip Serving
Read moreA new blend of tightly braided spectra and nylon yarn.
Tough and durable, Resin coated and grips well.
FEATURES:
- Grips well
- Available in solid colours.
-
Beiter Arm Guard
Read moreSame properties as the hard, in a more flexible rubber, allowing the armguard to flex and mold to the shape of your arm for a comfortable fit.
FEATURES:
• Protects the archer’s front part of the arm from being injured by the string
• Ventilated for warm weather use
• Includes two adjustable elastic straps and fasteners -
Beiter Button
Read moreThis Plunger Button encompasses Beiter’s attention to detail.
The ability to fine tune this button makes it extremely accurate. It may be more expensive that other buttons on the market, but it has no competition in terms of performance.
Note: The 17.5-23.0mm Button is suitable for most standard risers with stick-on rests, if using a wrap-around rest and/or a particularly thick riser, a longer length button may be required. Please get in touch to discuss if you are unsure on the size that you require.
-
Beiter Clicker
Read moreThe Beiter clicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all risers on the market, due to the different available models.
Different colours of the clicker Blade and many different components can individually adapt the clicker to the archer’s needs.FEATURES:
- Two different Blade colours – Chromed or Black Blade.
- Three different threads – metric and inch – for all common handles.
- Three different plate-thicknesses – 0.20mm/0.25mm/0.30mm – for the archer’s individual “sound-feeling”! (0.25mm Standard, other sizes Special Order Only)
- Two different colours for wheel and screw-washer – Black (Standard) and Light(Special Order Only)
- Straight (Standard) or Bent (Special Order Only) clicker-plates, as requested
- For all available handles.
-
Beiter Compound Rest
Read moreWhen you first see the Beiter Compound Rest, you’ll think: “What a massive and bulky rest!” – Yes, it is!
But as soon as you take it in your hands, you will notice, that the weight is relatively low… and it is not an impression. Werner Beiter used thermpolasts wherever possible to reduce weight, but still allowing as much stability as possible. Werner Beiter developed a revolutionary horizontal and vertical adjustment, which allows adjustments precise as 0,2mm: you could move the rest instead of the sight to move your group into the Centre!
The two Guidance Plates on the Launcher minimize the oscillation of it, while the arrow leaves the bow, but also change the stiffness of the launcher.
FEATURES:
- Horizontal and vertical movement without any fixation screw. The Rest can be adjusted without loosening or tightening any screw!
- Highest precision, thanks to a revolutionary concept: the Rest can be adjusted without tolerances and play, with a precision not known until today.
- Reproducible settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have Zero play.
- The launcher can be set in 2 different angles – 30° or 35°- by changing two little blocks. So the angles can be re-set precisely.
- Guidance Plates with bulge: Plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason for bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow.
- Stainless Steel 5/16“-24 screw with a flat-head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle.
INCLUDED:- 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°)
- 1 hex wrench for horizontal and vertical settings
- 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad
- 1 set of guidance plates with bulge: 22, 26, 30mm
